Electric Car Charger / Wallbox 11KW / BLACKBOX-SERIES
Delivery time: ⚡approx. 1-2 weeks⚡
Individual offers for commercial customers are available at:
Email: info@german-energy-solution.tech
Phone: +355 684 630 226
Made in the heart of Germany.
High-quality wallbox 11 Kw. -Made in Germany- 100% manufactured including static load management
All our wallboxes are compatible with all electric cars from all manufacturers!
Technical data
Housing material: ABS plastic UV-resistant
Charging power: 1-phase 3.7 Kw / 2-phase 7.4 Kw / 3-phase 11 Kw (The charging power automatically adapts to your electric car!)
Static load management: Each charging point can be individually controlled in terms of load. 6A / 8A / 10A / 13A / 16A
Residual current protection: DC 6mA (FI type B)
Protection class: IP 65 for permanent outdoor operation
Dimensions: Length: 440 mm / Width: 260 mm / Height: 115 mm
Locking / access security: Lockable via key switch including 2 keys
Info: The key can be removed during the charging process so that no third party has access to your wallbox or the key!
Charging connection: Charging cable with type 2 plug according to IEC 62196-1 (suitable for all type 2 electric cars)
Charging cable lengths: 3 meters / 5 meters / 8 meters
Standby consumption: <3W
Optional: APP - Smart control
- Measuring function: Energy consumption per phase
- Measured quantities: voltage, current, power
- Compatible with all major international voltage standards.
- Radio signal power: 1mW
- Wireless/WiFi protocol: 802.11 b/g/g/n
- Radio frequency: 2400 - 2500 MHz
- Range: Up to 50m outdoors and up to 30m indoors (depending on building material)
- Three independent measuring channels
- Can connect to any WiFi network or operate as an access point.
- 365 days internal storage if WiFi is not available .
- energy measurements and configurable alarm notification
- Compatible with Amazon Alexa
- Turn your wallbox on & off from anywhere in the world
- Time-controlled charging of your electric car
- Complete daily / monthly & annual evaluation of your charging processes
Convenience function: 230V Schuko socket lockable for your e-bike / e-scooter or vacuum cleaner etc.
Security:
- Over & undervoltage protection (does not protect against lightning strikes)
- Overcurrent protection
- Overtemperature protection
(If the temperature inside the charger exceeds 85°C, the charger will switch off.
automatically. When the temperature inside is back to max. 65°C
the charger switches on again.)
Downloads & Info
Operating instructions / Technical data sheet -English- 📃
Operating instructions / Technical data sheet -Albanian- 📃
Accesories
Steele / Stand for Wallbox
connection distributor for wallboxes
More information about our wallboxes and what a wallbox does!
A wallbox (or wall charging station) controls the charging process of your electric car at home. It can be conveniently attached to the wall (e.g. in the garage) or to a pillar. Wallboxes securely connect the high-voltage connection to your electric car.
Why a wallbox from us?
All our wallboxes are manufactured and tested by hand. Our wallboxes have a modular design, which means that if something breaks after many hours of operation, you can replace each component individually and you don't have to throw away the entire wallbox. This is how we achieve 100% sustainability -MADE IN GERMANY-
Do you have any questions, requests, suggestions or do you need individual advice and solutions? Then please contact us by email info@german-energy-solution.tech